MAINTENANCE
Blanket Warmer ▪ Oper a tor’s Ma nu al ▪ M N- 39 9 2 4 ▪ Rev 4 ▪ 8/20
42
Continued from previous page
Yearly cleaning
procedure
To clean the warmer yearly, do the following.
Step Action
1. Make sure that the warmer is disconnected from electric power and cool.
2. Remove the screws a from the support assembly.
Remove the support assembly b from the interior of the warmer.
3. Clean the support assembly and interior with a damp cloth.
4. Dry the interior of the warmer with a clean, lint-free cloth.
Leave the door open until the interior of the warmer completely dries.
5. Clean each side of the window pane with glass cleaner or distilled vinegar.
6. Re-install the support assembly.
Result The warmer is now clean.
WARNING: Personal injury hazard.
The blankets may overheat if the support assembly is
not in place. Make sure to re-install the support
assembly before operating the warmer.
To Next Page
Loading...
