Entrematic EMSL - Page 11

10 Issue 2009-06-17 1005274-EMEI-2.0
FUNCTION AND VISUAL INSPECTION
CLEANING
The best way to remove dust and dirt from the EMSL is to use water and a soft cloth or a
sponge. A gentle detergent may be used. To maintain the quality of the enamel layer, the
surfaces should be cleaned once/four months period. The cleaning should be documented.
To avoid damages to the profiles the brushes/weather stripping must be vacuum-cleaned
weekly.
Note!
• Do not expose windows, doors or profiles to alkalis. Both aluminium and glass are sen-
sitive to alkalis.
• Do not clean with high-pressure water. Operator, programme selector and sensor may
be damaged and water may enter the profiles.
• Do not use polishing detergent.
• Do not scrub with materials like Scotch-brite, as this will cause mechanical damage.
C
l
i
ck!
ILL-01798
12
11
1
4
10 11
9
11
2
8
9
6
≥ 25
5
5
7
3