4 Printer Installation
Clearance Requirements
The following measurements show the printer dimensions when the input hopper and printer
cover are open and the power cord is connected. Provide at least 3 inches (76.2 mm) of
additional clearance around the system to maintain access to the power cord and data cables, to
load and remove cards and supplies, and to provide ventilation.
Operating Environment
Use the following guidelines when operating the printer:
Operating temperature 60°–95° F (15°–35° C)
Operating humidity 20–80%, non-condensing
13.1 in
333 mm
17.5 in
444 mm
21.9 in
556 mm
10.9 in
277 mm
4.2 in
107 mm
17.5 in
444 mm
To Next Page
Loading...
Need help?
General
