34 Elements of Card Design
Smart Card Codes on the Printer Label
The configuration label includes codes that identify the type and model of the smart card module
installed in the printer. The following table lists the codes used on the configuration label.
The S1 value on the configuration label indicates that the printer has the basic smart card
components installed. Basic components include the mounting hardware only. An integrator
must install a contactless reader.
If the Sx value is included in the configuration code, the printer has the basic components of an
S1, plus the appropriate interface installed.
Code on Label Type of Smart Card Module
S1 Integrator Contactless
S14 OMNIKEY HID, Loosely Coupled, Contactless
S19 Identive Next Gen, Loosely Coupled, Contact/Contactless
The smart card readers available vary by printer model. Contact your authorized dealer
for more information.
To Next Page
Loading...
Need help?
General
