EM1, EM2 Card Printers User’s Guide 27
3. Load the cleaning card into the input hopper.
If the cleaning card appears bowed, insert it as
shown.
4. Close the input hopper.
5. Log in to Printer Dashboard using a user account and access the homepage.
6. Continue with “Run the Cleaning Card”.
Run the Cleaning Card
Use Printer Dashboard to start the cleaning cycle.
1. At the homepage of Printer Dashboard, click Cleaning Card.
The card is run through the printer and placed in the output hopper.
2. Remove the used cleaning card.
3. Continue with “Prepare the Printer for Use” on page 28.
Card Without Bow
Card With Bow
To Next Page
Loading...
