48 Troubleshooting
Clear a Card Jam
A card jam occurs when the card does not reach the proper position for the next action, such as
printing or ejecting the card.
You usually can resolve the error by pressing the U
SER button so that the USER button is solid
green. If the error persists, do the following to remove the card from the printer.
1. Open the printer.
2. Remove the print ribbon cartridge or cassette.
3. Turn the manual advance knob to move the jammed card until it exits into the output hopper
of a single-hopper printer, or is accessible from the rollers in a single- or multi-hopper printer.
4. Remove the card.
5. Replace the ribbon cartridge and close the printer.
6. Press the U
SER button on the printer.
HINTS & TIPS
Check the ribbon to make sure that it is not torn. Refer to “Repair a Broken Ribbon” on page 49
and “109: Print ribbon problem” on page 55 to repair or replace the ribbon, if needed.
To Next Page
Loading...
