Entrust Sigma DS4 User Manual

6 About the Printer
The Printer Cover
Use the cover latch handle to open the printer cover.
Input Hopper Lock The input hopper lock unlocks the input hopper.
Reject Tray Unfinished cards or cards not processed properly are placed in the
reject tray. An administrator can change the reject card location to
the output hopper using the Printer Dashboard. Refer to the Printer
Dashboard Help for more information.
Printer Lock The printer lock unlocks the printer cover and reject tray.
Printer Cover Open the printer cover to access the printhead and ribbon.
Cover Latch Handle Lift the latch handle to open the printer cover.
Cover Ridges Press down on the ridges when closing the cover to make sure that it
latches completely on both sides.
Cover Ridges
Cover Latch
Handle
Printer Cover

Entrust Sigma DS4 Specifications

General

Print Resolution	300 dpi
Card Capacity Input Hopper	100 cards
Card Thickness	0.76 mm
Card Sizes	CR80 (85.6 mm x 54 mm)
Connectivity	USB, Ethernet
Operating System Support	Windows
Encoding Options	Magnetic Stripe, Smart Card
Power Supply	100-240V, 50-60 Hz
Supported Card Types	PVC, Composite
Print Capabilities	Single and dual-sided printing