36 Using the Printer
Manual Feed Input Hopper Printer
Printers equipped with a manual feed input hopper require cards to be loaded individually when
requested. Condition 170 will display on the front panel when a print job is requesting a card to
be loaded.
1. Hold the card by the edges and slide the card into the manual input slot.
2. Push the card all the way into the manual input slot until it is picked.
Multi-Hopper Printer
1. Unlock the multi-hopper lock.
2. Slide the lock bar release button (B1) to
the left to release the hopper lock bars.
3. Rotate a lock bar to the left to provide
access to the multi-hopper input
cartridge that you want to load.
1
2
3
To Next Page
Loading...
Need help?
General
