Entrust Sigma Series - Replace the Cleaning Roller

10 528293-001_B
Sigma Series
Replace the Cleaning Roller
The cleaning roller removes dust and other parcles from cards before
they move into the printer. Replace the cleaning roller each me you
change the ink ribbon. Refer to the “Cleaning Schedule” on page 4
for addional informaon.
1. Open the printer cover and remove the print ribbon cartridge.
(refer to “Before You Begin” on page 6).
2. Remove the used cleaning roller from the ribbon cartridge. Discard
the used supply.
3. Load the cleaning roller on the ribbon cartridge.
4. Remove the protecve wrapper from the cleaning roller.
Protecve
Wrapper