Entrust Sigma Series - Run the Cleaning Card

1
2
3
4
5
6
8 528293-001_B
Sigma Series
Run the Cleaning Card
1. Use the LCD panel to run the isopropanol cleaning card.
When the cleaning cycle completes:
 If the printer does not have locks: The isopropanol cleaning
card is ejected into the output hopper. Remove and discard
the cleaning card.
 If the printer has locks: The isopropanol cleaning card is
placed in the printer reject tray (RT1). It can remain in the
reject tray unl the next me the tray is emped.
2. Connue with “Prepare the Printer for Use” on page 9.