Entrust Sigma Series - Multi-Hopper Printer Card Cleaning

Cleaning Guide
528293-001_B 7
Cleaning Card
4. Load the cleaning card into the input
hopper.
5. Close and lock the input hopper.
6. Connue with “Run the Cleaning
Card” on page 8.
Mul-Hopper Printer
1. Unlock the printer and open the
printer cover. Refer to “Before You
Begin” on page 6.
2. Remove the print ribbon, close the
cover, and lock the printer.
3. Pull out the mul-hopper excepon
slide and insert the cleaning card.
4. Push in the excepon slide.
5. Connue with “Run the Cleaning
Card” on page 8.
Single-Hopper Printer (cont.)