Envirovent MEV 160 User Manual

13
MEV 160 & MEV 300
0345 27 27 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
WITH YOUR UNIT, CALL US ON:
Replacing the remote-control battery:
• Undo the two screws and remove the rear casing.
• The battery is located behind the front cover. The remote control requires 1x CR2032 battery.
• Replace the battery, ensuring the correct polarity, then replace the rear cover and screws.
The switch will remain paired with the unit after battery replacement.
• Dispose of the old battery in a safe manner.
Red LED
Green LED
Remote control button

Envirovent MEV 160 Specifications

General

Brand	Envirovent
Model	MEV 160
Category	Fan
Language	English