15
MEV 160 & MEV 300
0345 27 27 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
WITH YOUR UNIT, CALL US ON:
POST-INSTALLATION CHECKLIST
• Installation instructions have been understood.
• Ductwork travelling through unheated areas has been insulated.
• Minimal amounts of flexible duct have been used in the installation.
• All ducts, valves and vents are connected, mechanically fixed and sealed.
• The unit is securely fixed with adequate space left for maintenance.
• Air flow rates have been commissioned with a calibrated anemometer or other suitable piece
of equipment to meet Approved Document F of the Building Regulations for England & Wales.
• Commissioning air flow rate data has been recorded.
• The occupants of the property are familiar with the operation and maintenance requirements
of the system.
SPARES AND ACCESSORIES
Item Description Order Code
125mm white extract valve 1DIFEXTRACT125WH
150mm white extract valve 1DIFEXTRACT150WH
Spare wireless
remote control
SWH-W
125mm rigid duct
connector (single)
PACKRIGID125
Fast Track 75mm/90mm
semi-rigid duct connector (single)
PACKFASTTRACK
To Next Page
Loading...
Need help?
General
