16
AFTER INSTALLING THIS UNIT,
PLEASE PASS ONTO END USER
DO NOT THROW AWAY
MAINTENANCE
There is no requirement for maintenance other than cleaning during the two year warranty period.
Before cleaning, Isolate the unit from the mains power supply. Undo all four screws around the
front cover and then use a flat head screwdriver to lift the three clips along the edge of the unit.
Now gently pull the cover away from the unit.
Remove any dust and debris from the inside of the unit.
Dust and debris should also be removed periodically from any extract valve filters that are fitted to
ensure they do not become blocked.
ISOLATE MAINS SUPPLY
To Next Page
Loading...
