5
MEV 160 & MEV 300
0345 27 27 810
SHOULD YOU ENCOUNTER ANY PROBLEMS
WITH YOUR UNIT, CALL US ON:
ABOUT THE MEV 160 AND MEV 300
The EnviroVent MEV 160 and MEV 300 are continuous mechanical extract ventilation systems
designed to help create a fresh and healthy living environment by drawing humid, stale air out of
wet rooms, while minimising the movement of humidity to other rooms.
The units are normally fitted in a central location, with ductwork running from the unit to the kitchen,
bathroom, en-suite, utility and other wet zones. The unit provides six possible spigot positions in
order to extract air from multiple locations.
The MEV 160 unit is capable of delivering a maximum airflow of 75 l/s (270 m3/hr) and a maximum
system pressure of 573Pa.
The MEV 300 unit is capable of delivering a maximum airflow of 103 l/s (370 m3/hr) and a maximum
system pressure of 650Pa.
The Intellitrac
®
humidity tracking function monitors the humidity levels in the extracted air and will
automatically increase the air flow rate when humidity levels rise. Once the humidity levels are
lower, the air flow rate will return to the programmed trickle setting.
The MEV 160 and MEV 300 include a switch live function and if used, will enter boost mode whenever
a switch live input is engaged.
The MEV 160 and MEV 300 come with either a wired boost switch or wireless remote control.
All MEV 160 and MEV 300 units are covered by a two year warranty.
To Next Page
Loading...
Need help?
General
