Envitec AlcoQuant 6020 - Possible Errors in Active Measurement; Blow Failure Error Handling; Flat Battery Error Handling

13
AlcoQuant® 6020 – Breathalyser – Operating Instructions
6.4
6.46.4
6.4 Possible errors in the case of active measurement
Possible errors in the case of active measurementPossible errors in the case of active measurement
Possible errors in the case of active measurement
6.4.1
6.4.16.4.1
6.4.1 Blow failure
Blow failureBlow failure
Blow failure
If during sample collection the test person blows into the AlcoQuant® 6020 to less or to
strong (8l/min < Flow < 70l/min) or not continuously, the measuring procedure is
automatically terminated and the following error message is displayed:
After this message the device automatically becomes ready to measure again (items in
Section 6.2.2) and measuring can be repeated.
6.4.2
6.4.26.4.2
6.4.2 Flat battery
Flat batteryFlat battery
Flat battery
A repeated signal tone and the status display “Change battery” indicates that the batteries
must be replaced. The device switches off after 10 seconds.