25
AlcoQuant® 6020 – Breathalyser – Operating Instructions
9
99
9 Device care/Cleaning instructions
Device care/Cleaning instructionsDevice care/Cleaning instructions
Device care/Cleaning instructions
9.1
9.19.1
9.1 General care instructions
General care instructionsGeneral care instructions
General care instructions
It is recommended that you use only mild cleaning agents to clean the device (preferably a
cloth slightly moistened with water or washing up liquid generously diluted etc). Organic
solvents such as pure alcohol, acetone, turpentine etc. should never be used for cleaning.
Care should be taken that no fluid penetrates the interior of the device. Special attention
should be paid to the aperture of the port that holds the mouthpiece as well as the
expiration apertures at the back of the device. The battery contacts and the serial interface
must also be kept dry and clean.
9.2
9.29.2
9.2 Electrical contacts
Electrical contactsElectrical contacts
Electrical contacts
Care must be taken that the electrical contacts inside the device (battery) and on the serial
interface remain clean and dry to ensure that the device functions perfectly for many years.
9.3
9.39.3
9.3 Battery change
Battery changeBattery change
Battery change
9.3.1
9.3.19.3.1
9.3.1 Battery charge indicator
Battery charge indicatorBattery charge indicator
Battery charge indicator
The AlcoQuant® 6020 displays the state of charge (SOC) of the batteries at all times.
If the SOC of the batteries is too low the following is displayed:
12:34
Change
battery
To Next Page
Loading...