30
AlcoQuant® 6020 – Breathalyser – Operating Instructions
Error display
Error displayError display
Error display Possible cause
Possible causePossible cause
Possible cause Remedy
RemedyRemedy
Remedy
Calibration
CalibrationCalibration
Calibration
An incorrect calibration date was
found.
Measuring is not possible.
Device must be calibrated again, please
inform Service.
If the device has already been calibrated, it
is possible that the current date settings
are not correct.
Here, too, please inform Service.
ATTENTION:
Each device error is signalised acoustically by a short dual signal and optically either by the yellow LED (error that does not
impair measurement) or by the red LED (error impairing measurement). It leads to a corresponding error message on the
display.
The error message must be acknowledged by pressing the “OK” key
briefly.
To Next Page
Loading...