Need help?Do you have a question about the EOGB X400 and is the answer not in the manual?
General safety and installation guidelines for the burner.
Specifications for burner output, fuel, electrical supply, and weight.
Detailed dimensional drawings and measurements for various burner models.
Graphical representation of burner operating limits based on output and resistance.
Diagrams and measurements for adjusting the burner head and electrodes.
Illustrated breakdown of burner components with numbered labels.
Instructions for physically attaching the burner to the appliance.
Details on the burner's air intake system and its adjustability.
Guidelines for connecting the burner electrically according to regulations.
Information on fuel supply systems and oil line requirements.
Requirements for combustion air and ventilation based on standards.
Pre-operational checks, nozzle selection, and pressure gauge fitting.
Step-by-step process for initiating burner operation and safety checks.
Procedures for checking and adjusting combustion settings for optimal efficiency.
Procedures for cleaning, checking components, and replacing parts like the nozzle.
Specifications and port identification for the BFP11 L3 fuel pump.
Specifications and port identification for the BFP21 L3 fuel pump.
Explanation of how the Danfoss BFP fuel pump operates and regulates pressure.
Guidance on oil supply line lengths for single-pipe systems.
Guidance on oil supply line lengths for two-pipe systems.
Table correlating nozzle capacity, pump pressure, and output in kW.
Troubleshooting no-start conditions due to lack of voltage or fuel.
Diagnosing no-flame issues including fuel, solenoid coil, and spark.
Identifying causes for lockout after flame establishment, like wiring or flame recognition.
Troubleshooting pulsating flame issues including nozzle and draught.
Troubleshooting smoking flame issues due to combustion settings or air.
Troubleshooting repeated ignition attempts and flame recognition.
Schematic diagram illustrating the electrical connections of the burner.
Key technical specifications for the burner's electrical components and operation.
To Next Page
General