CONTENTS
Technical Specifications
Technical Data ……………………………………………………………………. 2
Burner Dimensions …………………………………………………………………. 2
Working Fields ….……………………………………………………………….…. 3
Head / Electrode Settings …………………………………………………………. 3
Components ………………………………………………………………………. 4
Burner Installation
Mounting onto the appliance …………………………………………………….. 5
Air Intake Device ……………………………………………………………….…. 5
Electrical Connection ……………………………………………………………... 6
Fuel Supply ………………………………………………………………………… 6
Air Supply ………………………………………………………………………….. 6
Burner Operation
Before Start Up …………………………………………………………………….. 7
Start Up Procedure ……………………………………………………………….. 7
Normal Operating Mode ………………………………………………………….. 8
Burner Servicing ………………………………………………………………. 9
Fuel Pump Type BFP11L3 ……………………………………………………. 10
Fuel Pump Type BFP21L3 ……………………………………………………. 11
Fuel Pump Type BFP ….………………………………………………………. 12
Oil Line Tables …………………………………………………………………. 13
Nozzle Table …………………………………………………………………… 14
Fault Finding …………………………………………………………………… 15
Electrical Information
Wiring Diagram …………………………………………………………………... 20
Technical Data …………………………………………………………………… 20
IMPORTANT NOTE
The contents of the manual must be read and followed prior to the fitting and commissioning of the
burner.
Any work on this burner must be carried out by a suitably qualified, and experienced, engineer.
Any electrical or fuel supply must be isolated before any work is carried out.
The installation must be carried out in accordance with current Electrical Regulations and all relevant
Building Regulations.
Failure to meet with these requirements could lead to damage or injury, and could invalidate any
guarantee.
E90-803-001-001-00 - 04/06
1
To Next Page
Loading...