EOS Tech VT-300 - LED Signal Table

39
LED Signal table USB Backup LED state
When it completed backup USB then Green and Blue LED are
blinking at once. ⚠ The NDVR is not recording and save the
video file to micro SD card while backup to USB.
Operating
LED
Operating
LED
System Booting
(Approx. 5sec.)
Connecting
External Device
Re-booting
(Approx. 20sec.)
Not inserted
memory card
Firmware
updating
(Approx. 40sec.)
GPS signal
detected
Normal
Recording
Event Recording
(Approx.15sec.)
USB Backup
USB Backup
completed
Blinking
Just remove to connection after completed data backup to external
USB memory or HDD.
MOVIE 5.2 USB backup LED state.