3
* GPS receiver module requires warming up time for initial start
up. It may take several seconds or several minutes after
power is turned on according to signal receiving environment.
* Metallic coating on front window of vehicle may cause signal
trouble in GPS.
* Be careful for In-Cabin camera angle not to be shaded by
inside room mirror when the product install.
* Adhere after working Air Drier (Air Conditioner) in case of
much humidity.
* Do not operate the terminal in driving or it may cause a traffic
accident. Park vehicle safely first and then operate the
terminal.
* When service is required please contact our service center for
A/S.
* Do not touch to camera lens. Finger prints are may cause
unclear recorded video quality.
To Next Page
Loading...