EOS Tech VT-300 - Page 46

46
①② ①②
[ Figure 6.1.3] Information of overlaid on the 3rd camera video
Location
Descriptions
① Camera View
“REAR” is overlaid
② Time Information
The time information is selected by
configuration setup as “Timezone”
[Case 1: Only RTC is overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
[Case 2: Only UTC is overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
[Case 3: RTC & UTC are overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
UTC[YYYY:MM:DD-HH:MM:SS]
[Case 4: RTC with Daylight Saving Time]
DST[YYYY:MM:DD-HH:MM:SS]
Location
Descriptions
① Camera View
“IN-CABIN” is overlaid
② Time Information
The time information is selected by
configuration setup as “Timezone”
[Case 1: Only RTC is overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
[Case 2: Only UTC is overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
[Case 3: RTC & UTC are overlaid]
RTC[YYYY:MM:DD-HH:MM:SS]
UTC[YYYY:MM:DD-HH:MM:SS]
[Case 4: RTC with Daylight Saving Time]
DST[YYYY:MM:DD-HH:MM:SS]
[ Figure 6.1.2] Information of overlaid on the In-Cabin video