EasyManuals Logo

EOS P1+ User Manual

EOS P1+
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #25 background imageLoading...
Page #25 background image
25
EN
Please be sure to note!
Do not insert sauna rocks too tightly in
the rock store. Place them loose, leaving
as many spaces as possible to allow the
free ow of hot air for circulation purpos-
es. Please make sure that the stones do
not put any pressure on the heating ele-
ments.
Remove stones from the sauna heater
only when they cooled down.
It cannot be excluded that hot rocks or
their parts fall out of the rock store.
Risk of re!
Sauna stones are a natural product. Check the
sauna stones at regular intervals. Aggressive
sauna essences can weaken the sauna stones
and cause them to break apart over time. Con-
sult your sauna supplier if necessary.
Wash the delivered stones with owing water
thoroughly and put them into the stone bas-
ket in a way that they do not put any pressure
on the heating elements and that the air can
still circulate through the stones.
The quantity of stones is sucient to create a
steam shock, vaporizing about 10 cl of water
per m³ cabin volume. Always wait at least 10
minutes after an infusion before repeating it.
Only then the sauna stones will re-heat su-
ciently again.
By daily commercial use we recommend to
check the condition of sauna stones every 2-3
months and to reshue them.
By home use the sauna stones need to be
checked and reshued at least once per year.
Never add more essences or vola-
tile oils than advised on the packaging.
Never use alcohol or undiluted concen-
trates. Caution! Fire hazard!
The sauna heating unit is made of low-corro-
sion material. To enjoy your sauna heating unit
for a long time you should ensure maintenance
and take due care about the heater. Always
make sure that the air supply vents and reec-
tion surfaces in the area of air intake are free.
These can easily become clogged with fuzz and
dust when drawing in fresh air. This reduces the
air convection in the sauna heating unit and
can be a cause of too high temperatures.
Clean or de-scale the heater when needed.
Refer to your sauna supplier or directly to the
manufacturer in case of defects or signs of wear
and tear.
Only use original manufacturer‘s replacement
parts, which can be obtained from your suppli-
er or directly from the manufacturer.
If you did not use your sauna for a long peri-
od of time, always check before next use that
cloths, cleansers or other objects have not
been left on the sauna heating unit or the va-
porizer before turning them on.
Sauna rocks Maintenance and care

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the EOS P1+ and is the answer not in the manual?

EOS P1+ Specifications

General IconGeneral
Power1500 W
Voltage220-240V
Heating ElementCeramic
Adjustable ThermostatYes
Overheat ProtectionYes
Tip-over SwitchYes
Frequency50Hz

Related product manuals