EOS Vision - User Manual

Questions and Answers

L
Linda JonesJul 29, 2025
Why does my EOS Vision Heater take so long to heat up?
- Z
  Zachary CaseyJul 30, 2025
  Several factors can cause your EOS Heater to take a long time to heat up. It could be due to one or more defective heating elements, which would require a technician to replace the tubular heating element. Another reason might be insufficient space between the stones; in this case, you should reshuffle the stones. Insufficient ventilation can also be a cause; ensure the air inlets are properly installed, and if needed, add a fan to the openings. A defective electrical connection, such as installation fuses, can also be the reason for this problem. The position of the temperature sensor might not be optimal, so check its position and adjust it as needed. Finally, the control unit's outputs could be defective and should be checked by a technician.
B
Brenda AndersonAug 8, 2025
What to do if the safety temperature limiter was triggered in EOS Heater?
- D
  David Turner DDSAug 8, 2025
  If the safety temperature limiter (STB) in your EOS Heater has been triggered and the heater no longer heats, it could be due to heat accumulation. Check the inlets, outlets, and the fan to ensure the heater has access to sufficient air. You may need to replace the safety temperature limiter. Also, the position of the temperature sensor in the cabin might not be optimal, so check its position and adjust as needed.
K
Kyle DawsonAug 18, 2025
Why is my EOS Vision Heater very hot but not distributing heat?
- M
  Madison BradshawAug 18, 2025
  If your EOS Heater is very hot but not distributing heat throughout the cabin, it could be due to insufficient space between the stones. Reshuffle the stones to allow for better heat distribution.