EOS Vision - Table of Contents

EOS Vision - Installation and Operating Instructions EN-3
Contents
Documentation..................................................................................................EN-2
1 General safety instructions..........................................................................EN-5
1.1 Mounting and electrical installation .................................................EN-5
1.2 Operator instruction ...............................................................................EN-7
1.3 Safety levels................................................................................................EN-9
1.4 Standards and regulations....................................................................EN-9
2 Identification.................................................................................................... EN-10
2.1 Requirements for operation.............................................................. EN-10
2.2 Nameplate ............................................................................................... EN-10
2.3 Scope of delivery................................................................................... EN-11
2.4 Accessories (optional).......................................................................... EN-11
2.5 Technical data ........................................................................................ EN-12
2.6 Intended use........................................................................................... EN-13
3 Installation ........................................................................................................ EN-15
3.1 Specifications for the cabin............................................................... EN-15
3.1.1 Installation site ...................................................................... EN-16
3.1.2 Air inlets and outlets............................................................ EN-17
3.1.3 Temperature sensor............................................................. EN-19
3.2 Heater guard rail.................................................................................... EN-20
3.3 Preparing for installation.................................................................... EN-20
3.4 Connecting cable.................................................................................. EN-22
3.5 Installing the heater ............................................................................. EN-26
4 Electrical installation.................................................................................... EN-28
4.1 General instructions for electrical installation............................ EN-28
4.2 Inner wiring diagrams ......................................................................... EN-28
4.2.1 Connecting to 400 V 3N ~.................................................. EN-29
4.2.2 Connecting to 230 V 1N ~.................................................. EN-32
4.2.3 Internal wiring........................................................................ EN-33
4.3 Establishing an electrical connection............................................ EN-35
4.4 Heating period limitation................................................................... EN-35
5 Commissioning ............................................................................................... EN-36
5.1 Filling with stones ................................................................................ EN-36
5.2 Starting the heater................................................................................ EN-37
5.3 Switching the heater on remotely .................................................. EN-37
5.4 Water splash............................................................................................ EN-38