What to do if the EOS Heater safety temperature limiter was triggered?
If the safety temperature limiter was triggered by heat accumulation, check the inlets, outlets, and the fan to ensure the heater has enough air. Then, reset the safety temperature limiter.
Why does my EOS Heater take so long to heat up?
Several factors can cause a long heat-up time for your EOS Heater. One or more heating elements might be defective, requiring a technician to replace the tubular heating element. Insufficient space between the stones could be the issue, so reshuffle them. Inadequate ventilation may also be to blame; install air inlets or add a fan to the openings. A defective electrical connection is another possibility, so check the installation fuses. Also, have the control unit's outputs checked by a technician. Finally, the temperature sensor's position might not be optimal, so check and adjust it as needed.
General| Installation | Wall-mounted |
|---|---|
| Power | 6 kW, 9 kW |
| Stone Capacity | 20 kg |
| Outer Material | Stainless steel |
| Frequency | 50 Hz |
| Type | Sauna Heater |
| Voltage | 400 V |
| Safety Features | Overheating protection |
Instructions for qualified personnel on electrical installation and safety precautions.
Information for the sauna cabin operator on safety and controls.
Details of labels attached to the heater and cabin as per standards.
Explanation of safety warning symbols (Warning, Caution, Notice).
Overview of standards and local regulations applicable to sauna heaters.
Specifies the control unit required for heater operation.
Details of the information found on the heater's nameplate.
Lists the components included with the heater package.
Provides electrical connection data, cable specifications, and fuses.
Defines the proper use of the heater and lists foreseeable misuse.
Requirements for cabin planning, installation site, and electrical lines.
Information on installing a mandatory heater guard rail for safety.
Step-by-step guide for physically installing the heater unit.
Instructions on washing, stacking, and filling the heater with stones.
Guidance on attaching warning signs to the cabin exterior.
Ensures electrical installation complies with local norms and RCD considerations.
Instructions on connecting the control unit and heater as per diagrams.
Steps for guiding the cable to the relay box and connecting to the control unit.
Explanation of how the control unit manages heating time limits.
Procedures for switching on the sauna control unit and selecting a program.
Guidelines for pouring water on stones for steam generation and safety.
Regular cleaning of the heater for longevity and performance.
Guidance on checking, reshuffling, and replacing sauna stones.
Detailed steps for safely replacing defective heating elements.
Instructions on how to reset the heater's safety temperature limiter.
Common errors, their causes, and solutions for heater issues.
To Next Page
