EN-38 Installation and Operating Instructions - EOS Cubo / Cubo Avantgarde
EN Maintenance
6 Maintenance
This sauna heater is made of low-corrosion material. To ensure a long ser-
vice life, take care of and perform regular maintenance on your sauna
heater. Ensure that openings in the intake area and heat reflectors are
never blocked. These can easily become blocked with lint and dust as fresh
air is drawn in. This limits the air convection ability of the sauna heater and
could lead to impermissible temperatures. Clean and/or descale the units
as needed. Contact your sauna retailer or the manufacturer directly if you
notice malfunctions or signs of wear and tear. If you do not use your sauna
for a longer period of time, ensure that at the time of recommissioning no
towels, cleaners or other objects are lying on the sauna heater or vaporizer.
6.1 Cleaning
The heater must be cleaned regularly. The cleaning frequency depends on
how often it is used.
CAUTION
Risk of injury from sharp edges
Use suitable personal protective equipment, e.g., gloves, when
cleaning parts with sharp edges.
Clean the heater only with household cleaners.
To Next Page
Loading...
Need help?
General
