To Next Page

To Previous Page

EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-35

Connections

4.3 Establishing an electrical connection

The description below assumes all connection works on the heater have

been completed (3.3.1 Installing the connecting cable,  EN-26).

 Connecting the connecting cable to the control unit

1 Guide the cable from the cabin to the sauna relay box.

 To allow the heater to be moved for servicing, do not pull the con-

necting cable completely out of the cabin.

2 CAUTION! Ensure that the control unit has no power.

Connect the connecting cable as shown in the installation instructions

for the control unit.

4.4 Heating period limitation

The control unit ensures that the heating period limitation is observed.

Refer to the installation and operating instructions of the control unit.

Other manuals for EOS Cubo

Questions and Answers:

Need help?

Do you have a question about the EOS Cubo and is the answer not in the manual?

General