EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-5
General safety instructions
1 General safety instructions
1.1 Mounting and electrical installation
The installation instructions are intended for qualified
personnel familiar with the laws and regulations appli-
cable to electrical installations at the installation site.
Observe the following general safety instructions
during mounting, configuration and commissioning
of the product.
Risk to life and limb and risk of fire
Risk to life and limb from electric shock and fire in the event of im-
proper or faulty electrical connection. This risk remains also after
completion of the installation work.
The electrical installation of the heater, relay boxes and other
electrical systems or equipment with a fixed mains connection
must only be performed by a trained electrician from an autho-
rized electrical company.
Ensure compliance with the applicable standards and regula-
tions for electrical installation.
The system must be completely disconnected from the mains
supply before commencing installation and repair work.
The housing cover must only be removed by a qualified electri-
cian.
Fire hazard from overheating
Insufficient ventilation can lead to device overheating and fire.
Install air inlets and outlets in the cabin.
Observe the cabin manufacturer’s safety and installation in-
structions.
To Next Page
Loading...
Need help?
General
