EN-6 Installation and Operating Instructions - EOS Cubo / Cubo Avantgarde
EN General safety instructions
Risk of fire due to sauna stones
It is possible for hot stones or stone pieces to fall out of the rock
store.
The sauna heater may not be placed on a floor made of easily
flammable material (e.g., laminate or synthetic flooring). Ce-
ramic tiles are recommended as a flooring option.
Risk of burns from hot glass
Glass surfaces in the cabin become hot while the sauna is in oper-
ation.
When installing the cabin, ensure that the touchable glass sur-
faces on its outside do not exceed a maximum temperature of
76°C/169°F. Appropriate protection may need to be installed.
Risk of burns from hot unit
During operation, the sauna heater may become hot and, if
touched, could cause burns.
Maintain a safe distance.
Sauna cabin and heater
The sauna cabin must be constructed with proper material and
built in a professional manner, and the heater must be suited for
the cabin.
Sauna heaters and control units may only be used in sauna cab-
ins made of suitable, low-resin and untreated material (e.g.,
Nordic spruce).
Multiple heaters may be installed in one sauna if the heater
power can properly supply the cabin volume. In this case, de-
pending on the position, an additional safety temperature lim-
iter must be installed for each additional heater.
The sauna heater is not designed to be installed or set up in an
alcove or under a bench or sloping roof unless the sauna heater
is specifically designed and approved for this type of installa-
tion.
To Next Page
Loading...
Need help?
General
