EOS Cubo / Cubo Avantgarde - Installation and Operating Instructions EN-37
Commissioning
5.2 Water splash
Before the first water splash can be carried out, the cabin must be suffi-
ciently heated. The temperature in the cabin is controlled from the control
unit via the temperature sensor. The control panel indicates when the
desired temperature has been reached.
WARNING
Risk of fire due to sauna essences
Incorrectly diluted sauna essences, essential oils or herbs can
catch fire.
Never add more sauna essence or essential oils to the water
than the amount indicated on the container.
Do not add herbs to the water or the stones.
Do not use pure sauna essences for water splashes.
Do not use alcohol for water splashes.
Pour the water over the stones only.
Pour the water slowly and evenly over the stones. As the hot air rises, steam
is distributed evenly in the cabin to create a pleasant infusion experience.
Please note that the sauna stones must be reheated after each water
splash to generate an intense burst of steam.
Recommendation: During a water splash, no more than approx. 10 cl/
0.4 cups of water per m³ cabin volume should be vaporized. After each
water splash, wait approx. 10 minutes before starting the next one. This
time is needed for the sauna stones to reheat.
To Next Page
Loading...
