Three Phase Output (DC to AC) Inverter
Users Manual
Ver1.2 PAGE :
1. GENERAL INTRODUCTION
1.1 SYSTEM DESCRIPTION
Inverta Series Three Phase Output (DC to AC) Inverter is a high technology equipment, including
all protection and control systems, which is designed and manufactured to convert DC voltage to
pure sinus and regulated AC voltage. It provides AC power, which is especially important for
industrial, telecom and military applications.
When this system is used with a rectifier at its input, it acts and serves as a frequency converter,
which converts an AC source to another AC with a defined frequency.
This equipment contains an input isolation transformer and provides full electrical isolation between
DC input supply and AC output.
This uses all advantages of DSP (Digital Signal Processor) control. It provides advanced user
interface, smart diagnostics and advanced communication features.
Inverta Series Three Phase Output (DC to AC) Inverter uses “Voltage Vector Control” technology.
Thanks to this, high efficiency, very fast dynamic response and operability with a lower DC bus
voltage is possible.
To Next Page
Loading...
General