Three Phase Output (DC to AC) Inverter
Users Manual
Ver1.2 PAGE :
5.3 CONTROL AND SETTINGS MENUS
Control and Settings Menus can be reached by a push to Enter button, when the screen is in
Measurements Menu.
The structure and hierarchi or these menus are given below.
Functional
Password
This item is the password required to modify other adjustable parameters.
The equipment is shipped with default password 0000.
New Password
After the correct password is entered, the password can be modified using
this item.
Start Mode
This setting defines whether the inverter will start generating AC voltage
itself or after an user intervention, when it is energized.
Language
Defines the language selection for front panel. Front panel language can be
choosen as English or Turkish. Default language after factory test is English.
Serial Link (Only for devices having OPS-01 option)
This setting is used to select, which application will occupy the serial link of
the inverter. FreeMaster communication for factory settings or Modbus
communication for user purposes can be chosen.
Alarm Relays (Only for devices having OPS-01 option)
This menu block is used to set up which relay or relays will be released in
which alarm condition. (Only for devices having OPS-01 option)
Modbus
This submenu contains items to setup the Modbus communication.
Comm. Mode
Baud Rate
Slave No
Parity
To Next Page
Loading...
General