Important Safety Instructions
Please save this manual for future review.
This manual contains safety, installation and operation for Maximum Power Point Tracking (MPPT)
TRIRON series controller ("the controller" as referred to in this manual).
General Safety Information
Read carefully all the instructions and warnings in the manual before installation.
No user serviceable components inside the controller. DO NOT disassemble or attempt to
repair the controller.
Mount the controller indoors. Prevent exposure to the elements and do not allow water to
enter the controller.
Install the controller in a well ventilated -place. The controller’s heat sink may become very hot
during operation.
It is suggested to install appropriate external fuses/breakers.
Make sure to switch off all PV array connections and the battery fuse/breakers before
controller installation and adjustment.
Power connections must remain tight to avoid excessive heating from loose connection.
To Next Page
Loading...
