Important Safety Instructions
Please reserve this manual for future review.
Please reserve this manual for future review. This manual contains all instructions about safety,
installation, and operation for the inverter/charger.
Read all the instructions and warnings carefully in the manual before installation.
Non-safety voltage exists inside the inverter/charger; users must not dismantle it by
themself, contact professional maintenance personnel of our company for maintenance.
Keep the inverter/charger out the reach of children.
Do not place the inverter/charger in a damp, oily, inflammable, and explosive or severe
environment with a large amount of dust accumulation.
The utility input and AC output have high voltage; please don't touch wire connections.
Install the inverter/charger in well-ventilated places. Its shell may produce heat during
operation.
It is suggested to install appropriate external fuses/breakers.
Make sure to switch off all connections with the PV array and the fuse/breakers close to the
battery before inverter/charger installation and adjustment.
Make sure all connections remain tight to avoid excessive heat from a loose connection.
It's an off-grid inverter/charger, not for an on-grid system.
This inverter/charger can only be used singly. Parallel or series connections will damage the
devices.
Explanation of symbols：To enable users to use the product efficiently and ensure personal and
property safety, please read related literature accompanying the following symbols.
TIPs: Indicates any practical advice for reference.
IMPORTANT: Indicates a critical tip during the operation, if ignored, may cause the device to
run in error.
CAUTION: Indicates potential hazards, if not avoided, may cause the device damaged.
WARNING: Indicates the danger of electric shock, if not avoided, would cause casualties.
WARNING HOT SURFACE: Indicates the risk of high temperature, if not avoided, would
cause scalds.
Read the user manual carefully before any operation.
To Next Page
Loading...
