Maintenance
Main unit care and maintenance
1. Shut off power supply before doing
maintenance.
2. Use only a soft, damp cloth to clean.
Avoid using harsh chemicals.
3. Once cleaning is completed and all
surfaces are dry, re-connect the power
plug.
Spray nozzle maintenance and care
1. When no one is seated, turn the knob
clockwise. The nozzle will automatically
stretch out to allow access for cleaning.
2. When the nozzle moves forward, the
nozzle can be removed and cleaned
separately.
3. Use only a soft cloth or soft brush to
clean. Do not pull or push the wand, to
avoid damage.
4. Put the nozzle back and short press the
knob to return the spray wand to its
normal position.
Filter maintenance
If poor spray performance occurs under
normal conditions:
2. Unscrew angle valve nut
1. Turn off power and the angle valve
3. Remove filter net
4. Clean out the filter net under running
water using a toothbrush
5. Reinstall filter and angle valve nut.
6. Turn on the angle valve and connect
power.
15
To Next Page
Loading...
