Emergency troubleshooting
Power and water failure
Put around 2.1Gal (8L) water into a barrel
and flush the ceramic bowl.
Note: Avoid water spilling from bowl.
Product unused for a period of time
When the product is left unused for a
long time, especially in cold weather,
it is highly recommended to drain the
water to prevent freezing.
To discharge water
1. Activate flushing, and then turn off angle
valve to stop water supply.
3. Disconnect the hose from angle valve,
drain the water and reconnect.
2. Unplug and cut off the electricity
4. For your safety, it is recommended to put
antifreeze into the remaining water in the
bowl.
Note: Before water discharging, the
power must be cut off!
* Please turn on power and water supply
when using again.
Knob
1. Operate via knob on the main unit.
Failure of remote control
16
To Next Page
Loading...
