RESET
REMETTRE
TEST
1. Turn on the angle valve
a. Once power is connected, the buzzer beeps. The knob lights up in white, and the
self-inspection starts.
b. The buzzer beeps again, then the self-inspection completes.
c. The product is ready to use.
Check the threaded connection for leaks to ensure complete sealing. Turn the angle
valve counterclockwise to the full open position.
(Note: The angle valve opens with a large torque for the first time.)
Preparation
Angle valve
3. Self-inspection
2. Power Connection
Insert the leakage protection plug into a power socket, press the reset switch, plug
indicator lights up, indicating that the power is on.
Note:
Press the test button prior to usage, the reset
switch pops up indicating that the leakage
protection function is normal.
Press the TEST button (then RESET button)
every month to assure proper operation
.
Current detection
test button
Reset switch
Indicator light
* Only for models with leakage protection plug.
* Please refer to the actual product.
12
To Next Page
Loading...
