Description of the knob function
1. When seated, turn the knob clockwise to start front washing function, and turn
counterclockwise to start rear washing function. Rear and front washing function
will automatically enter into the drying function after completion. (Note: default
water pressure, water temperature, air temperature, seat temperature, wand
position are intermediate.）
2
.
When no one is seated, turn the knob clockwise to start manual cleaning function
of the nozzle.
4. During drying, clockwise rotation increases air temperature and counterclockwise
rotation decreases air temperature.
5. In functional mode, press the knob to stop function in progress: rear washing, front
washing, drying or nozzle cleaning. In addition, press the knob to flush the toilet.
6. When seated and no function is opened, press the knob to open the drying. To enter
into standby mode, when not seated, press and hold the knob.
7
.
To enter into functional mode, press the knob.
Below shows the indicator light status:
Functional mode: White light;
Energy saving mode: Breathing light;
Standby mode: Light off.
* Default settings for all functions level are intermediate when powering on. Use remote
control to switch to the function level set before.
3. During rear and front washing, turn the knob clockwise to move the spray wand
forward, and counterclockwise to move the spray wand backward; Long press the
knob to switch to the water pressure adjustment function. Clockwise rotation
increases the water pressure, while counterclockwise rotation decreases the water
pressure. (Note: During washing, long press the knob to switch between the
functions of water pressure adjustment and spray wand position adjustment.）
17
To Next Page
Loading...
