PNP/PCI Configurations
This category specifies the value (in units of PCI bus clocks) of the latency timer
for the PCI bus master and the IRQ level for PCI devices.
PC health status
This page shows hardware monitor information.
Load Optimized Defaults
BIOS defaults indicate the most appropriate value of the system parameters for a
standard system performance.
.
Set Supervisor Password
Change, set, or disable the password. It allows the supervisor to change BIOS
settings.
Set Password
Change, set, or disable the password. It allows you to limit access to the system
and to the setup, or just to the setup.
Save & exit setup
Save CMOS value changes to CMOS and exit setup.
Exit without saving
Discard all CMOS value changes and exit setup.
To Next Page
Loading...