18
2.3.3 Turning on/off the Batteries in Parallel
When multiple batteries of the same model are connected in parallel, you
can only press the power button on the 1# battery (the battery connect to the
machine, refer to figure 2-6) or the remote switch to turn on/off the batteries.
1. To turn on the batteries, please press and hold the power button on the 1# battery
or the remote switch for 1 second (no more than 3 seconds). The batteries will
start and self-check. If there are no warnings, it means the batteries are really for
use.
2. To turn off the batteries, please press and hold the power button on the 1# battery
or the remote switch for 3 seconds, you can see the indicators on the remote and
batteries are off.
The maximum continuous discharging current of the battery is 40A (E40)/80A
(E80)/150A(E175). Only the machine with load current less than this value can
be connected.
If the batteries are connected in parallel, the discharging current range will
increase.
If the discharging current is exceeded, the fuse of the battery may be blown.
To Next Page
Loading...
Need help?
General