What to do if ePropulsion E Series shows E65 error?
If your ePropulsion Camera Accessories shows error E65, disconnect all connections to the battery. After a short wait, restart the battery to see if the error persists. If the error continues, it's recommended to contact an authorized ePropulsion dealer.
What to do if ePropulsion Camera Accessories shows overvoltage?
First, check if the battery is fully charged. If it is, the overvoltage is normal. If the battery isn't fully charged, but over-voltage protection occurs, contact an authorized ePropulsion dealer.
What to do if ePropulsion E Series discharge shows overcurrent?
Disconnect the machine. Restart the battery and check. If the issue persists, contact an authorized ePropulsion dealer. If the fault doesn't persist, examine the external circuitry for a short-circuit or high-current load.
What to do if ePropulsion Camera Accessories indicates charge/discharge over temperature?
Disconnect the charger or machine. If the temperature is too high, cool the battery and restart it after the temperature decreases, ensuring you operate the battery at a suitable temperature. If the temperature is too low, use the battery at an appropriate temperature. If the problem continues, contact an authorized ePropulsion dealer.
What to do if ePropulsion E Series Camera Accessories shows other faults?
Disconnect all connections to the battery. Then restart the battery after a while and see if the fault persists. If it does, please contact an authorized ePropulsion dealer.
What to do if ePropulsion E Series discharge shows undervoltage?
Stop discharging. Charge the battery. If the fault continues, please contact an authorized ePropulsion dealer.
What to do if my ePropulsion Camera Accessories is overvoltage?
Check if the battery is fully charged. If it is, the overvoltage may be normal. If the battery isn't fully charged, this indicates a problem.
What to do if my ePropulsion E Series doesn't respond when pressing the power button?
If your ePropulsion Camera Accessories isn't responding when you press the power button, consult the user manual to ensure you are operating it correctly. If the issue persists, please contact an authorized ePropulsion dealer.
How to fix error E63 on ePropulsion E Series?
If your ePropulsion Camera Accessories is showing error E63, check the battery and external cable for any short circuits. If no short circuit is found, disconnect all connections to the battery, wait a short period, and then restart the battery to see if the error persists. If the error continues, contact an authorized ePropulsion dealer.
What to do if the ePropulsion Camera Accessories battery has no input or output?
If your ePropulsion Camera Accessories battery isn't providing any input or output, inspect the connections among the battery, charger, and the device. Reconnect both the communication and power cables. Try disconnecting the device or charger, waiting briefly, and then reconnecting them. If the issue continues, contact an authorized ePropulsion dealer.
General| Brand | ePropulsion |
|---|---|
| Model | E Series |
| Category | Camera Accessories |
| Language | English |
Lists items included in the battery package and unpacking instructions.
Identifies key components, ports, and provides dimensional diagrams of the battery.
Details technical parameters like voltage, capacity, power, and environmental ratings.
Crucial safety guidelines and precautions for battery handling and use.
How to check the battery's current state using indicators and power button.
Steps and precautions for connecting the battery to external devices like outboard motors.
Procedures for powering the battery on and off using the button or remote switch.
Instructions and safety notices for charging the ePropulsion battery using specific chargers.
Guide on how to safely connect multiple batteries in parallel for expanded capacity.
Explains the meaning of different LED status lights on the battery display panel.
Solutions for overvoltage faults and protection scenarios.
How to handle issues related to battery temperature during operation.
Diagnosing issues when the battery is unresponsive to power or charging.
Guidelines for safely transporting the battery, including package integrity and protection.
Recommended procedures for storing the battery when not in use, including environmental conditions.
Details the terms, duration, and conditions of the product warranty.
Steps to follow when making a warranty claim, including required documentation.
To Next Page