Page 1
1.0 Important Safety Information
This manual contains important safety, installation and operating instructions for
eTracer. Save these instructions.
The following symbols are used throughout this manual to indicate potentially
dangerous conditions or mark important safety instructions. please take care when
meeting these symbols.
NOTE: Indicates a procedure or function that is important for the
safe and proper operation of the controller.
General Safety Information
·Read all of the instructions and cautions in the manual before installation.
·There are no user serviceable parts inside the controller. Do not disassemble or
attempt to repair the controller.
·Mount the controller indoors. Prevent exposure to the elements and do not allow
water to enter the controller.
·Please install controller in ventilated places, the temperature of heat sink may be
quite high when working.
·Install external fuses/breakers as required.
·Disconnect the solar module and fuse/breakers near to battery before installing or
adjusting the controller.
·Confirm that power connections are tightened to avoid excessive heating from loose
connection.
To Next Page
Loading...
