Windows Me/98
For Windows Me/98, use the following procedure to install the necessary components.
1. Click Start, point to Settings, and then select Control Panel.
2. Double-click the Network icon. Check if the following necessary components are in the list of
installed network components on the Configuration menu. If they are already installed, go to
the next chapter.
The following table lists the components required for configuring the network interface with
EpsonNet Config.
EpsonNet Config’s setting screens Necessary components
TCP/IP, AppleTalk, IPP, SNMP (IP trap) TCP/IP
MS Network NetBEUI or TCP/IP
NetWare, SNMP (IPX trap)* Latest Novell Client downloaded from the Novell Web site
* Only for printers supporting NetWare queue-based printing
EPSON Network Guide
How To 26
To Next Page
Loading...
