4. Click the icon located next to EpsonNet Config.
5. Follow the on-screen instructions to complete the installation.
Note:
If the Windows Security Alert window appears after you start EpsonNet Config, click the
Unblock button; otherwise the devices are not listed on the screen of EpsonNet Config.
Accessing the EpsonNet Config User’s Guide
The EpsonNet Config User’s Guide contains detailed information on EpsonNet Config. Follow the
steps below to access the EpsonNet Config User’s Guide.
1. Click Start, point to Programs (for Windows Me, 98, 2000, and NT 4.0 users) or All
Programs (for Windows Vista, XP, and Server 2003 users), select EpsonNet, and then select
EpsonNet Config V2. Click EpsonNet Config to start it.
2. From the Help menu, select EpsonNet Config Help.
The EpsonNet Config User’s Guide appears. By clicking the links on the left side of the screen,
you can get information on using EpsonNet Config.
EpsonNet Config for Macintosh
About EpsonNet Config
EpsonNet Config for Macintosh is a Macintosh-based configuration software for administrators
that allows you to configure the network interface for TCP/IP and AppleTalk.
Note:
Be sure to use EpsonNet Config included on the Software CD-ROM shipped with this product.
System Requirements
The following table lists the system requirements of EpsonNet Config.
Operating systems Mac OS 10.2.x or higher
EPSON Network Guide
Network Software 91
To Next Page
Loading...
