Mac OS X 10.4 or below
1. Open the Applications folder.
2. Open the Utilities folder.
3. Open Print Center (for Mac OS X 10.2 or below) or Printer Setup Utility (for Mac OS X 10.3
or later), and then click Add.
4. For Mac OS X 10.4, select the printer model that is connected with Bonjour.
For Mac OS X 10.2 or 10.3, select Rendezvous from the drop down list, and then select the
printer model from the list.
Note:
For Mac OS X 10.4, if your printer is not displayed with the desired connection, click More
Printers, select the desired connection from the drop down list, and then select the printer model.
5. Click Add.
Now you can use the printer on the TCP/IP network.
Note:
If your product supports the scanning function, see the product’s User’s Guide to make the settings.
Installing the Printer Driver
About Installing the Printer Driver
To print to the network printer, you need to install the printer driver on the computer. See the
section in this chapter appropriate for your operating system.
Windows Vista/Server 2008
The printer driver installation procedure differs depending on the printing method you prefer.
Epson recommends printing with EpsonNet Print. See “For Windows Vista/XP/Server 2008/
Server 2003/2000/NT 4.0 Users” on page 100.
EPSON Network Guide
How To 43
To Next Page
Loading...
