System Requirements
The following table lists the system requirements of EpsonNet Config.
Operating systems Windows Vista
Windows XP Professional/Home Edition
Windows Me
Windows 98/98 Second Edition
Windows Server 2008
Windows Server 2003
Windows 2000 Server/Professional
Windows NT 4.0 Server/Workstation with Service Pack 5.0 or higher
Hard disk drive space 49 MB
Installing EpsonNet Config
Follow the steps below to install EpsonNet Config on your computer to configure the network
interface.
Note:
If you add or delete protocols or services from your operating system after installing EpsonNet Config,
EpsonNet Config may not work correctly. If this happens, uninstall EpsonNet Config and then install
it again.
1. Make sure all the applications are closed, then insert the Software CD-ROM in the CD-ROM
drive.
Note:
If the Network Utilities CD-ROM is included in your package, insert it instead of the Software
CD-ROM.
2. The Software Installation screen opens automatically.
If the Software Installation screen does not appear, double-click EPSETUP.EXE on the CD-ROM.
3. Click the Install Network Utility button.
Note:
This step is skipped if you install the software from the Network Utilities CD-ROM.
EPSON Network Guide
Network Software 90
To Next Page
Loading...
