6. If you want to install software other than printer driver, select those check boxes. Click the
Install button and follow the on-screen instructions.
Note:
If the Windows Security Alert window appears, click the Unblock button; otherwise the printer is
not listed on the screen of EpsonNet EasyInstall.
7. EpsonNet EasyInstall starts. Select the printer and then click the Next button.
8. Select a method for specifying the IP address. If you select Automatic, DHCP becomes
available and assigns an IP address automatically. If you want to set the IP address manually,
select Manual and then enter the IP address, subnet mask, and default gateway. Click the Next
button.
EPSON Network Guide
How To 37
To Next Page
Loading...
