3. Under Network Tasks, click Change settings of this connection.
4. Check that Client for Microsoft Networks is installed. If it is not installed, click Install to
install it.
5. Run the command prompt and enter the following command.
NET USE printer port: \\NetBIOS name of network interface\Device name of network interface
Selecting the port
1. Click Start, click Control Panel, click Printers and Other Hardware, and then click
Printers and Faxes.
2. Right-click the printer icon and then select Properties.
3. Click the Ports tab and then select the port you have set with the NET USE command.
Encrypting print data (Secure IPP printing)
Internet printing (IPP) enables you to encrypt data to print.
Required settings
Configure the following settings using EpsonNet Config with Web Browser.
See “EpsonNet Config with Web Browser” on page 93 for details.
❏ Importing server certificate
❏ Selecting server certificate
❏ Setting encryption strength
❏ Setting printer port
Configuring the printer port
1. Select Connect to a printer on the Internet or on a home or office network: in the Internet
printing (IPP) wizard.
2. Enter the URL using the format below.
https://IP address of network interface:443/EPSON_IPP_Printer
EPSON Network Guide
How To 53
To Next Page
Loading...
